Took me 3 weekends to figure out why my shed door wouldn't sit flush
I hung a new door on my shed back in April and it scraped the frame at the bottom corner no matter how many times I shimmed the hinges. I checked the frame with a level, rehung the door twice, even planed the edge down a hair, and it still dragged. Turned out the concrete pad under that corner had settled about 3/8 inch, so the whole shed was out of square and I was chasing the wrong thing the whole time. I ended up shimming the sill plate with a couple of cedar scraps and it swings clean now. Anyone else run into a settled slab messing with a door, and how did you fix it?